Thursday, November 23rd 2017, 12:04pm UTC+1

You are not logged in.

  • Login
  • Register


Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, November 14th 2017, 4:07pm

by SEGGER - Nino

Hello Earl,

Quick follow up question.
Is there a particular reason that you are using uCos?
Alternatively we suggest using our own embedded OS called embOS:

Would that be of interest of you?
The benefit would be that all our software and hardware tools are optimized to work perfectly with embOS so it would make sense to take a look if you already are using several of our products.

Best regards,

Monday, November 13th 2017, 4:31pm


Ok, thankyou
I am new to systemview... I tried the single snap shot mode.

Wednesday, November 8th 2017, 10:08am

by SEGGER - Nino

Hello Earl,

System View continuous recording is not possible on ARM9 cores as RTT is used for that.
So you are limited to single shot recording or post mortem mode with that device.
More information can be found on the SystemView website and the user manual.

Best regards,

Monday, November 6th 2017, 3:13pm


SystemView Integration with uCos III V3.03.01, RTT block not found

Hello all,

I am using Version V3.03.01 uCos_III within a LPC2925 ARM9 processor.
The debugging pod is a J-link base version 9.2. I used the

sample code for uCos_III from your website. I have added the code to the build.

  • I check within RAM memory and
    found "SEGGER RTT" string marking the being of the RTT control block at a
    memory location of 0x8000222c. SystemView should be able to find the
    control block, but doesn't
Sometimes I get " Bad JTAG
communications write to IR: Expected 0x1, got 0x0 Trap Command : 2 @ off
0x9". Other times I just get RTT block not found. I am not sure how to
proceed from here.

I have read the manual several times, but I still can't seem to get
communication between my version of uCos_III and SystemView. I know the
later version of uCos III release in 2016 has already integrated

SystemView in their cod base, but I am using a 2012 release.

Can you give me more informaiton on how the communicaiton flow between
the SystemView Host program an the target? From what I understand,
SystemView first looks for the string "SEGGER RTT" to find the

control block. What does SystemView do next? has attached the following file:
  • error.bmp (240.14 kB - 20 times downloaded - Last download: Today, 10:21am)