Saturday, April 21st 2018, 3:33pm UTC+2

You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Wednesday, March 14th 2018, 4:11pm

by SEGGER - Nino

Hello,

Quoted

Can I ask, how is systemview suppose to run if it does not include it's own Qt libraries, and the host system may or not have them?

We are currently working on a Linux white list for Linux distributions that fulfill the needed requirements.

Quoted

Could you paste the output of ldd SystemView?

Source code

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
ldd '/opt/SEGGER/SystemView/SystemView' 
	linux-vdso.so.1 (0x00007ffd30ffc000)
	libQtGui.so.4 => /lib64/libQtGui.so.4 (0x00007fca5de9d000)
	libQtCore.so.4 => /lib64/libQtCore.so.4 (0x00007fca5d999000)
	libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fca5d77a000)
	libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007fca5d3f4000)
	libm.so.6 => /lib64/libm.so.6 (0x00007fca5d09f000)
	libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fca5ce88000)
	libc.so.6 => /lib64/libc.so.6 (0x00007fca5caa5000)
	librt.so.1 => /lib64/librt.so.1 (0x00007fca5c89d000)
	libdl.so.2 => /lib64/libdl.so.2 (0x00007fca5c699000)
	libgthread-2.0.so.0 => /lib64/libgthread-2.0.so.0 (0x00007fca5c497000)
	libglib-2.0.so.0 => /lib64/libglib-2.0.so.0 (0x00007fca5c183000)
	libpng16.so.16 => /lib64/libpng16.so.16 (0x00007fca5bf50000)
	libz.so.1 => /lib64/libz.so.1 (0x00007fca5bd39000)
	libfreetype.so.6 => /lib64/libfreetype.so.6 (0x00007fca5ba84000)
	libgobject-2.0.so.0 => /lib64/libgobject-2.0.so.0 (0x00007fca5b831000)
	libSM.so.6 => /lib64/libSM.so.6 (0x00007fca5b629000)
	libICE.so.6 => /lib64/libICE.so.6 (0x00007fca5b40d000)
	libXi.so.6 => /lib64/libXi.so.6 (0x00007fca5b1fc000)
	libXrender.so.1 => /lib64/libXrender.so.1 (0x00007fca5aff2000)
	libXrandr.so.2 => /lib64/libXrandr.so.2 (0x00007fca5ade7000)
	libXfixes.so.3 => /lib64/libXfixes.so.3 (0x00007fca5abe1000)
	libXcursor.so.1 => /lib64/libXcursor.so.1 (0x00007fca5a9d6000)
	libXinerama.so.1 => /lib64/libXinerama.so.1 (0x00007fca5a7d3000)
	libfontconfig.so.1 => /lib64/libfontconfig.so.1 (0x00007fca5a58e000)
	libXext.so.6 => /lib64/libXext.so.6 (0x00007fca5a37c000)
	libX11.so.6 => /lib64/libX11.so.6 (0x00007fca5a03e000)
	/lib64/ld-linux-x86-64.so.2 (0x00007fca5ebc4000)
	libpcre.so.1 => /lib64/libpcre.so.1 (0x00007fca59dcb000)
	libbz2.so.1 => /lib64/libbz2.so.1 (0x00007fca59bba000)
	libffi.so.6 => /lib64/libffi.so.6 (0x00007fca599b2000)
	libuuid.so.1 => /lib64/libuuid.so.1 (0x00007fca597ad000)
	libexpat.so.1 => /lib64/libexpat.so.1 (0x00007fca5957b000)
	libxcb.so.1 => /lib64/libxcb.so.1 (0x00007fca59353000)
	libXau.so.6 => /lib64/libXau.so.6 (0x00007fca5914f000)


Best regards,
Nino

Friday, March 9th 2018, 10:55am

by v01d

Hello,

As far as I see in my original install log:


1 JLink_Linux_V630a_x86_64.rpm

2 ozone-2.54.2.x86_64.rpm

3 JLink_Linux_V630b_x86_64.rpm ozone-2.56.x86_64.rpm systemview-2.52.1.x86_64.rpm



Can I ask, how is systemview suppose to run if it does not include it's own Qt libraries, and the host system may or not have them?
As RPM does not spec that dependency.

Could you paste the output of ldd SystemView?

Thursday, March 8th 2018, 1:43pm

by SEGGER - Nino

Hello,

Thank you for your inquiry.
We tried to replicate the described behaviour in a Fedora 27 VM.
First we installed the J-Link software RPM package, then SystemView.
After that SystemView could be launched over CL or per double click without any issues.
Picture is attached.

Could you describe step by step how you installed the software and in what order?

Best regards,
Nino
SEGGER - Nino has attached the following image:
  • Capture.PNG

Sunday, February 4th 2018, 6:12am

by v01d

libQTGui from latest jlink (jlink-6.30.1-1.x86_64) /ozone package doesn't work,

but the libQT files included in ozone-ubuntu-2.30.4.x86_64.rpm work (SystemView starts )

Sunday, February 4th 2018, 3:05am

by v01d

systemview systemview-2.52.1.x86_64.rpm is a broken install

After (successfully) installing systemview-2.52.1.x86_64.rpm, application won't run because:

SystemView: error while loading shared libraries: libQtGui.so.4: cannot open shared object file: No such file or directory

(This library seems included in JLink & ozone installation packages, unlike ..)