Tuesday, January 23rd 2018, 8:25am UTC+1

You are not logged in.

  • Login
  • Register

Search results

Search results 1-18 of 18.

Friday, January 12th 2018, 2:16pm

Author: ilkay.kozak

Bootloader

Hello Nino, You can find my elf file attached. ELF Header is below. When I connect using Target/Connect J-Link/Verify , it's output is; ( it flashes bank 0 (0x08000000 - 32K ) Connecting ?J-Link? using ?USB? Connecting to target using SWD Loaded /Applications/SEGGER Embedded Studio for ARM 3.34/bin/libjlinkarm.dylib Firmware Version: J-Link Pro V4 compiled Dec 12 2017 14:34:30 DLL Version: 6.22d Hardware Version: V4.00 Target Voltage: 4.603 Device "STM32F207VE" selected. Found SW-DP with ID 0x2B...

Tuesday, January 9th 2018, 7:55pm

Author: ilkay.kozak

Bootloader

Hello, I use STM32F207VC and my bootloader address is between 0x08000000 and 0x08003FFF . Application starts at 0x08004000 . But when I start debug , it checks CRC and erases bootloader sectors. How can I protect bootloader sectors? Regards, ilkay KOZAK

Thursday, January 4th 2018, 1:55pm

Author: ilkay.kozak

SetRTTSearchRanges

Hello, I use Keil MDK and want to set RTT Range. the Command is 'SetRTTSearchRanges 0x20000000 0x10000' . I can execute it JLink command window. is there any documentation for SetRTTSearchRanges in Keil MDK? (How to use it?) Regards, ilkay KOZAK

Saturday, December 23rd 2017, 7:44am

Author: ilkay.kozak

ESP32 Development

Hello, is it possible to use openOCD (J-Link connection) in SES? in openOCD there is a config file called esp32.cfg , it configures and connects to esp32 device. How can I use that config file ? (you can find esp32.cfg attached.) Regards, ilkay KOZAK

Wednesday, December 20th 2017, 6:12pm

Author: ilkay.kozak

ESP32 Development

Hello Nino, I use J-Link , visualgdb (visual studio community edition) without any problem. I can download and debug esp32 code. You can check links below. https://visualgdb.com/tutorials/ https://sysprogs.com/w/forums/topic/open…er-jlink-esp32/ Regards, ilkay KOZAK

Wednesday, December 20th 2017, 3:11pm

Author: ilkay.kozak

ESP32 Development

Hello, Do you have any plan to support ESP32 Development? Because it also uses GNU tools, so I think it will be easy to port . ESP32 will be more an more popular. Regards, ilkay KOZAK

Monday, December 18th 2017, 2:41pm

Author: ilkay.kozak

[SOLVED] RTT Control Block Range

Hello, I use STM32L433VC microcontroller from ST. it has 64 KB of RAM. But RTT searches range between 0x0000 AND 0x7FFF . So if RTT Block address is bigger than 0x8000 , JLink-Pro keeps searching and doesn't find correct address. How can I change search address range? Regards, ilkay KOZAK

Friday, December 15th 2017, 1:45pm

Author: ilkay.kozak

SES 3.30 crash MAC OS X High Sierra 10.13.2

Hi Nino, Ozone works without any problem. Regards, ilkay KOZAK

Friday, December 15th 2017, 1:28pm

Author: ilkay.kozak

SES 3.30 crash MAC OS X High Sierra 10.13.2

Hello Nino, My J-Link Pro Serial is 174402868 . I also use Parallels desktop . I don't know if this causes that crash. I've created a demo project for STM32F207xx . It is same. When I launch SES it crashes if J_link Pro is connected. I face same problem on my Macbook Pro too. (You can find attached project and picture.) Regards, ilkay KOZAK

Thursday, December 14th 2017, 8:43pm

Author: ilkay.kozak

SES 3.30 crash MAC OS X High Sierra 10.13.2

When I lauch SES 3.30 using Terminal.app, crash log is below when I try to enter debug. Regards, ilkay KOZAK p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #000000; background-color: #ffffff} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #000000; background-color: #ffffff; min-height: 13.0px} span.s1 {font-variant-ligatures: no-common-ligatures} Last login: Thu Dec 14 22:31:07 on ttys000 /Applications/SEGGER\ Embedded\ Studio\ 3.30/SEGGER\ Embedded\ Studio\...

Thursday, December 14th 2017, 8:14pm

Author: ilkay.kozak

SES 3.30 crash MAC OS X High Sierra 10.13.2

Hello Nino, I found that if my J_Link Pro is connected it crashes. After disconnecting it works properly. But When I start debugging it crashes again. What can I do to fix it? (Ozone also works properly.) I use J-Link Software v6.22c . Regards, ilkay KOZAK

Thursday, December 14th 2017, 8:00pm

Author: ilkay.kozak

SES 3.30 crash MAC OS X High Sierra 10.13.2

Hello Nino, Thank you for your reply. Regards, ilkay KOZAK

Wednesday, December 13th 2017, 6:08pm

Author: ilkay.kozak

[SOLVED] GCC sys/fcntl.h

Hello Nino, Now I use external GNU GCC compiler to solve my problem. Because SES GCC compiler and header files are not compatible with GNU ARM Compiler v6. Thank you, ilkay KOZAK

Wednesday, December 13th 2017, 6:06pm

Author: ilkay.kozak

SES 3.30 crash MAC OS X High Sierra 10.13.2

Hi, When I launch SES 3.30 from Terminal, I get error below. modalSession has been exited prematurely - check for a reentrant call to endModalSession Then it pops up 'We're Sorry window' that SES has encountered a problem needs to close. Ho do I fix it? Regards, ilkay KOZAK

Sunday, December 10th 2017, 8:30pm

Author: ilkay.kozak

[SOLVED] GCC sys/fcntl.h

Hello, I want to port my code to SES. it's toolchain is GCC , but I can not compile it using SES. Because sys/fcntl.h , sys/syslimits.h etc. are missing? Normally SES is compatible with GCC ARM compiler. How can I fix it? Regards, ilkay KOZAK

Thursday, January 28th 2016, 4:15pm

Author: ilkay.kozak

RTT Viewer

Hi, it is Segger Embedded Studio 2.14 and target is STM32F107VC. Is there any option that we can embed RTT Viewer output to 'SES' (or any telnet client) ? I mean stdout redirection. Because RTT is very useful for debugging . Regards ilkay KOZAK

Tuesday, January 26th 2016, 9:57am

Author: ilkay.kozak

RTT Viewer

Hello, is it possible to use RTT Terminal Support in SEGGER Embedded Studio? I need to separate messages to Terminal 0, Terminal 1 etc. Second problem is in 'Debug Terminal' windows, Studio misses a lot of debug messages at the beginning, then it displays regularly. Regards