Tuesday, March 20th 2018, 2:53pm UTC+1

You are not logged in.

  • Login
  • Register

Search results

Search results 1-11 of 11.

Monday, November 13th 2017, 4:13am

Author: henry10210

Waste of $700...

I do Nino; supporting a hobby platform like RPi will be a low priority for any company. It would have been nicer if Niklas had told me up front that SEGGER will not support Raspberry Pi even on J-Link Ultra+; could have saved $700...

Sunday, November 12th 2017, 5:26pm

Author: henry10210

[ABANDONED] How to disassemble cross-compiled ELF in ozone?

Hello, I was looking for a better side-by-side (C-and-assembly) view of the code than what gdb give you, so I am trying out ozone (other people apparently got it to work as you can see here). But after loading up my u-boot ELF file, ozone does NOT show me the assembly (only the machine code) as you can see in the attached picture. I would guess this is because ozone doesn't know where my cross-tool chain is--even though I have an environment variable called CROSS_COMPILE. How can I tell Ozone to...

Tuesday, November 7th 2017, 7:37pm

Author: henry10210

More detailed documentation than UM08001 (something like the OpenOCD manual)?

Hi Nino, I get exactly the same output when I use JLinkExe. Strangely, the Reset proc is not called at all. I didn't realize that initializing a Cortex A's debug would be so complicated. I am struggling to understand why some of your examples even use the internal DAP ADDR write followed by DAP DATA write (which makes sense at a low level) vs. memory mapped write. At this point it's hard to see which one I can get working first--OpenOCD + J-Link route, or JLinkExe + J-Link route. At least OpenOC...

Sunday, November 5th 2017, 9:31pm

Author: henry10210

pointer to APB-AP decoder?

Hi Nino/Niklas, I have written a JLinkScript for Raspberry Pi 2, but it doesn't quite work yet. Here is the latest output fro JLinkGDBServer using this custom device I created: ------Target related settings------ Target device: BCM2836_A7_0 ... Firmware: J-Link V9 compiled Sep 26 2017 17:01:02 Hardware: V9.30 S/N: 609302643 Feature(s): RDI, FlashBP, FlashDL, JFlash, GDB Checking target voltage... Target voltage: 3.30 V Listening on TCP/IP port 2331 Connecting to target... *** J-Link V6.21a Inter...

Monday, October 30th 2017, 5:04pm

Author: henry10210

NXP_iMX7D_Connect_CortexA7_0.JLinkScript example

Thanks for the clarification Nino, I now think that my confusion was caused by people using RPi as a debug probe or debug host--which is not what I want to do. I think the closes JLinkScript example for initializing a Cortex-A7 target(s) is the NXP_iMX7D_Connect_CortexA7_0.JLinkScript shipped with J-Link SW. But in it, I see SetupTarget() in addition to ResetTarget() and InitTarget(). The latter 2 are described briefly in the J-Link user manual section 5.11.1, but not SetupTarget(). Can you plea...

Saturday, October 28th 2017, 4:50pm

Author: henry10210

Are RPi 2,3 really not supported?

Thanks for the tip, Nino. Can you please help me with my confusion. Naklas and you both say you don't support the BCM2835,2836,2837 SoCs for the RPi. I thought I understood that, but then I found forum posts (just search for "raspberry") where people report success, and Niklas says it worked for him just last month. It seems that JLinkExe was used to connect to the target. Given that I am trying to do the same thing (connect to the target with JLinkExe or JLinkGDBServer) why would Niklas say it'...

Friday, October 27th 2017, 7:33am

Author: henry10210

J-Link+ v9.3 against RPi2 does not work

The RPi2 I had ordered arrived, and I got a J-Link+ v9.3. Still doesn't work. I also attached the Saleae logic capture data. TDO and TDI are hopping, and you can apparently talk to the chip. But still no connection. Can you please suggest what I should try? Thank you. $ JLinkExe SEGGER J-Link Commander V6.21a (Compiled Sep 29 2017 16:47:39) DLL version V6.21a, compiled Sep 29 2017 16:47:34 Connecting to J-Link via USB...O.K. Firmware: J-Link V9 compiled Sep 26 2017 17:01:02 Hardware version: V9....

Friday, October 20th 2017, 2:41am

Author: henry10210

Please put me on an alert list for A53 support

I ordered J-Link Ultra+ v4 yesterday. Meanwhile, I'll try to connect my J-Link+ v9 to Raspberry Pi (original).

Tuesday, October 17th 2017, 7:33pm

Author: henry10210

What does Cortex-A7 mean to JLinkExe?

Have not found an information so far what would happen if I tried to specify Cortex-A7 to JLinkExe against Cortex-A53 chip (like the BCM2837 on RPi3) using JLink+ v9. Do I have to know the internals of J-Link to figure this out, or is there some ARM document that will answer this question? Thanks for reading.

Tuesday, October 17th 2017, 5:03pm

Author: henry10210

Are the J-Link Ultra+ being sold on Mouser electronics the v4?

Thank you Niklas, I should have read through the whole manual... How can I check if what the distributor is selling is Ultra+ v1 or v4?

Monday, October 16th 2017, 4:57pm

Author: henry10210

[ABANDONED] J-Link+ problem connecting to Raspberry Pi 3

Hello, I have been following a help page on sysprog s website to try JTAGging into my RPi3 (B+) for the last week. I am trying to find whether J-Link+ even supports cortex-a7 (a53 would be even better, but I'll settle for working). I documented my steps and the problem on my blog entry , but here's where I am stuck (recap). When using JLinkGDBServer (on Ubuntu 16.04 running in Parallels Desktop): just connection failure. When using JLinkExe, and choosing CORTEX-A7, JTAG, 4000 KHz: Source code 1 ...