Sunday, May 20th 2018, 12:12pm UTC+2

You are not logged in.

  • Login
  • Register

Search results

Search results 1-4 of 4.

Wednesday, May 16th 2018, 1:29pm

Author: shankar

embos ERROR 166

I have done...but still error persists.......

Wednesday, May 16th 2018, 12:25pm

Author: shankar

embos error

i have checked that one all ready ... we are configured IRQ_PRIORITYGROUP_4 . so we can use priority 4 bits ( 0- 15)

Wednesday, May 16th 2018, 12:03pm

Author: shankar

os error

i am using valid embOS license version. i gave ex for OS_SignalEvent()....... i am facing issue with both timer interrupt and os interfaces. i placed code for only timer interrupt.... here is the full code //timer init function void Timer3Init(void) { // Enable Clock for TIMER3 RCC->APB1ENR |= RCC_APB1ENR_TIM3EN; // Set the Edge-Aligned mode TIM3->CR1 &= ~(DWORD)(TIM_CR1_CMS); //Direction as Down counter TIM3->CR1 |= (DWORD)TIM_CR1_DIR; //set update request //This is to trigger interrupt only wh...

Wednesday, May 16th 2018, 11:44am

Author: shankar

embos ERROR 166

embOS for ARM version 4.30 with IAR workbench 7.8 using STM32 family STM32F303VE controller Whenever I try to use OS interfaces its throwing os error 166(OS_ERR_CPU_STATE_ISR_ILLEGAL) Ex Interfaces; OS_EnterNestableInterrupt(); OS_SignalEvent(JUPEvent, &TCB_JUPEvent); here is the code snipet of ISR handler void TIM3_IRQHandler(void) { OS_EnterNestableInterrupt(); // Check for Timer Status register to know whether interrupt has occured if(((TIM3->SR & (DWORD)TIM_SR_UIF) == (DWORD)TIM_SR_UIF) != R...