Saturday, March 17th 2018, 5:08pm UTC+1

You are not logged in.

  • Login
  • Register

Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.



Date of registration: Jul 16th 2012

Posts: 1


Tuesday, July 17th 2012, 5:09pm

NAND Flash programming iMX535, MT29F2G08ABAEAWP


On a project we are working it is mounted a MT29F2G08ABAEAWP NAND flash device, attached to an iMX535 Cortex A8 core processor.
After a connection attempt by J-Flash, using the config attached, an error messaage occours: "Detect flash memory: unsopperted flash type....".
Is it possible to programm this NAND flasg device?
vsrala has attached the following file:
  • WLF_9012771.txt (1.96 kB - 646 times downloaded - Last download: Today, 5:00pm)


Super Moderator

Date of registration: Dec 18th 2007

Posts: 1,516


Wednesday, July 18th 2012, 8:58am


Yes, in general J-Flash is able to do so.
As mentioned many time before:
There is no generic way to detect a NAND flash connected to a MCU since from MCU to MCU and even on the same MCU there are multiple ways to connect a NAND flash.
It could be connected to a NAND flash controller or only via GPIOs (and at least in the second case the user is totally free in deciding which pins to use).

In order to program the NAND flash, you will need a so-called custom RAMCode which is especially designed for the hardware you are using.

Best regards