Friday, August 18th 2017, 4:13pm UTC+2

You are not logged in.

  • Login
  • Register

Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

avenger

Beginner

Date of registration: May 31st 2017

Posts: 2

1

Tuesday, June 13th 2017, 3:31pm

[SOLVED] RTT different speed on different channels

Hello,

I'm using JLinkArm DLL to communicate via RTT with Nordic nRF52 processor. I need to transfer fairly large amount of data from PC to uC.

For that data, I allocated channel 2 (0 is for logging). When using RTT_Read() and RTT_Write() I observed that channel 2 is slow, only writing 1kB of data each 200ms. On RTT channel 0 I can transfer 1kB each 30ms, which is enough for my application.

Is this a limitation in the DLL or the target implementation? How can I enable other RTT channels to work as quickly as channel 0? Ideally I want to use more channels in both directions.

Regards,
Filip

SEGGER - Niklas

Super Moderator

Date of registration: Oct 6th 2014

Posts: 1,561

2

Tuesday, June 13th 2017, 3:50pm

Hi Filip,


could you please open a ticket by writing a mail to the J-Link support regarding this issue?


Best regards,
Niklas
Would you like to be added to the J-Link software update notification list, so you get informed automatically when a new version becomes available?
Just write me a PM or in case you want to subscribe to it yourself, please use this link: Link
Notification for J-Link, J-Link Debugger, SystemView & J-Scope: Link
Notification for Embedded Studio: Link

avenger

Beginner

Date of registration: May 31st 2017

Posts: 2

3

Tuesday, June 13th 2017, 4:24pm

Hi Niklas,

thank you for your quick response. I sent the email to the support.

Best regards,
Filip