Sunday, March 18th 2018, 8:22pm UTC+1

You are not logged in.

  • Login
  • Register

Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.



Date of registration: Sep 28th 2017

Posts: 1


Thursday, September 28th 2017, 3:29pm

STM32 with SSD1963


i'm new and i try to understand the samples from emWin.
But i understand not the connections between MCU and grafic controller.
I found in the user manual the different possibility to connect the controller.

In the case of the online sample i can't say which controller and which mode is used.

My goal is to connect the SSD1963 controller to a STM32 board.

For the SSD1963 i think the indirect interface is the correct one.
33.2.2 Indirect interface - Parallel bus

Maybe someone can get me a short tip.



SEGGER - Schoenen

Super Moderator

Date of registration: Aug 13th 2015

Posts: 512


Monday, October 2nd 2017, 11:10am


The SSD1963 LCD controller is supported by the GUIDRV_FlexColor driver.

It gets connected by an indirect interface.

Attached is a sample configuration for the GUIDRV_FlexColor configured to be used for the SSD1963. This configuration uses bit banging but it should be quite easy to use a hardware interface like SPI.

SEGGER - Schoenen has attached the following file: