Friday, April 20th 2018, 12:51am UTC+2

You are not logged in.

  • Login
  • Register

Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

oli@snr.ch

Beginner

Date of registration: Feb 7th 2011

Posts: 5

1

Tuesday, February 8th 2011, 12:04am

[SOLVED]AT91SAM3U stuck in download

When i try to debug some demo-code from ATMELs AT91SAM3U-EK via arm-none-eabi-gdb, then the j-link gdb-server first donwload something, but stuck then for ever in a loop. Hers the log:
...
T0F34 1828:368 JLINK_ReadMemHW(0x400E0A08, 0x0004 Bytes, ...) - Data: 00 00 00 01
T0F34 1828:369 JLINK_ReadMemHW(0x400E0A08, 0x0004 Bytes, ...) - Data: 00 00 00 01
T0F34 1828:370 JLINK_ReadMemHW(0x400E0A08, 0x0004 Bytes, ...) - Data: 00 00 00 01
T0F34 1828:371 JLINK_ReadMemHW(0x400E0A08, 0x0004 Bytes, ...)

The address 0x400E0A08 is the EEFC Flash Status Register of the bank1. And the state says: "The Enhanced Embedded Flash Controller (EEFC) is ready to start a new command."

But the j-link gdb-server dont belive this in some way and asks again and again... Hier are some gdb-commands i tryed:

target remote localhost:2331
monitor reset
monitor speed auto
monitor flash device = AT91SAM3U4E
monitor flash breakpoints = 1
monitor flash download = 1
load bin/usb-device-massstorage-project-at91sam3u-ek-at91sam3u4-flash.elf

Any hint?

oli@snr.ch

Beginner

Date of registration: Feb 7th 2011

Posts: 5

2

Tuesday, February 8th 2011, 11:00am

The "monitor endian little" was missing... :D